still need CRT shield and parts from a Tektronix 543 or 545 scope.

[Opcom]

looking for a good CRT shield from a 543 or 545 scope. A good one will be free of dents so the magnetic properties will be intact.

Prefer if it has the attached lamp sockets with it and would appreciate whatever hardware came out with it.

other items:
- Maybe the graticule if it is clean and an 8x10 or 10x10 grid.
- The HV anode connector with a reasonable length of wire would be appreciated as would the CRT socket.
- The 5 little sleeve-clips that fit the pins sticking out of the CRT neck would be handy as well.
- The brightness and focus pots and their insulated mounts would be of interest as well.

Don't need the rotation assembly and I can get along with just the shield if necessary. It's for a project using the same CRT. Hopefully someone has a parts unit.

[Opcom]

I'm still in need of this thing.. if anyone has the part. and/or the other tidbits from a parted scope.

CRT shield from a 543 or 545 scope

please see previous post