The AM Forum
December 05, 2024, 02:53:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Af-68 Bias from M-1070  (Read 3662 times)
0 Members and 1 Guest are viewing this topic.
NJ2MR
Member

Offline Offline

Posts: 11


« on: April 04, 2012, 06:44:23 PM »

What do you guys think of this Bias curcuit

* BIAS FOR MULTI ELMAC AF-68.doc (51 KB - downloaded 486 times.)
Logged
K3ZS
Member

Offline Offline

Posts: 1036



« Reply #1 on: April 05, 2012, 08:35:27 AM »

Other methods shown for the AF-67 are simpler and do not require an extra power wire.   The one I use is to place a 5W/22V Zener in series with the modulator tubes (which are now grounded) and then ground the center tap of the driver transformer.   Theoretically this reduces the driving voltage of the modulator but I find with this method, there is still more than enough modulation.  Search this board for AF-67 mods.   There are other ideas.
Logged
K3ZS
Member

Offline Offline

Posts: 1036



« Reply #2 on: April 05, 2012, 10:35:06 AM »

To clarify, put the zener in series with the modulator tube cathodes, back biased.   I also have the zener bypassed, I think around a 0.1 uF cap.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.044 seconds with 18 queries.