The AM Forum
October 14, 2024, 05:40:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: UNIDEN 2020  (Read 8494 times)
0 Members and 1 Guest are viewing this topic.
9a3wl
Member

Offline Offline

Posts: 8



« on: April 01, 2012, 02:40:37 PM »

Hello,

I m searching for the pinout of the 16 pin power connector of the UNIDEN (TEMPO)2020 SSB-Transceiver.
There must be pins for 12 V operation and for 220 V.
can help?

tnx in advance    9A3WL MILAN 73 GL
Logged
W1RKW
Contributing
Member
*
Offline Offline

Posts: 4419



« Reply #1 on: April 01, 2012, 03:34:17 PM »

Milan,
Try this link: http://www.rigpix.com/mischam/uniden_2020.pdf  or  http://www.rigpix.com/schematicsnstuff.htm

See page 30 for power connections.

GL
Bob
Logged

Bob
W1RKW
Home of GORT.
9a3wl
Member

Offline Offline

Posts: 8



« Reply #2 on: April 02, 2012, 02:58:23 AM »

tnx Bob I have this manual, but nothing....on page 30...
Logged
9a3wl
Member

Offline Offline

Posts: 8



« Reply #3 on: April 02, 2012, 03:13:05 AM »

I HAVE INF.

The Tempo or Uniden 2020 should be able to run on 12vdc or 100-240 VAC.

The transformer connections inside the transceiver have to be arranged for the desired AC voltage.  Figure 27 in the manual shows those connections.

The choice of AC or DC power is made by choice of the proper pins at the power cord connector on the rear panel.

Looks like AC power would be applied between pin  7 and pin 12.   Pins 6, 8, 14, and 16 are all wired together.  Pins 9 and 10 connected to each other.  Pins 1 and 2 connected together.  Pins 3 and 11 connected together

Steve WD8DAS
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.046 seconds with 18 queries.