Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Controlled carrier and audio mod for the Heathkit DX-40




 
The AM Forum
October 19, 2019, 04:36:47 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Controlled carrier and audio mod for the Heathkit DX-40  (Read 6299 times)
0 Members and 1 Guest are viewing this topic.
n1uvi
Member

Offline Offline

Posts: 47



« on: January 26, 2012, 02:54:35 PM »

I recently began restoring a Heathkit DX-40 and put it back on the air, a very fun project indeed.
Details are available on my QRZ page, please feel free to check it out. Anyhow, not finding any
reference to any DX-40 mods, after trying several of the DX-60 mods on the DX-40 and not having any joy
I managed to come up with a mod that works quite well on the DX-40. Much like the DX-60 mods that
are out there, however this mod uses a 6DR7 tube in place of the 6DE7 modulator.
The 6DR7 is a dissimilar double triode like the 6DE7, the second triode is identical but the first triode has a much higher
amplification factor than the 6DE7.
This mod  provides 100% modulation with very good audio frequency response.
The resting carrier is 12 to 15 watts, and carrier shift is eliminated.
The negative 120 volt DC supply is obtained by using a 6.3 volt power transformer in reverse,
that is as a step-up transformer, using the filament voltage available in the DX-40


* dx40mod.jpg (73.43 KB, 688x415 - viewed 2095 times.)

* 120vpower.jpg (26.45 KB, 487x176 - viewed 1245 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.053 seconds with 18 queries.