I have a Gates RF Driver PC board in nice condition with a barrier strip attached. My plan was to build a 120 watt 160/80/40 meter rig around it. I got as far as a "breadboard", got it up to about 90 watts input and decided to change gears with a new switching output centered around a B&W 851 tank and parallel 807s in a 150 watt amp from the 1957 Handbook so this is surplus. It is for the board only. I believe this put out over 100 watts to drive the 833 RF pair in a Gates BC-1T transmitter. I replaced the screen resistor and soldered on color-coded leads to the European connector. I have the diagram. I'm looking to get $50 plus shipping.
This is just for the board as shown. The coils, choke and other parts in the 3rd photo are not included. I added that pix to show what I was working on previously...a non-switching inductive coupler for 160.
Thanks a munch!
Mike - W9ZSL