The AM Forum
May 03, 2024, 08:57:58 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: B&W butterfly cap  (Read 2624 times)
0 Members and 1 Guest are viewing this topic.
W8ACR
Contributing
Member
*
Offline Offline

Posts: 729


254W


« on: July 14, 2011, 12:50:39 AM »

For Sale: Very nice B&W butterfly capacitor. Model CX-49A. Approx 50 pf per side. 1/2 inch plate spacing. N3 neutralizing caps attached. This cap would be good for a push pull transmitter on 40-10 meters. Use of a padder might get you on 75 meters as well. I believe 1/2 inch plate spacing is good for about 15kv. Very nice condx. $20 plus shipping.

Ron W8ACR
skipperfam@midrivers.com   SOLD


* butterfly cap 001.jpg (926.53 KB, 1728x1152 - viewed 505 times.)

* butterfly cap 003.jpg (992.99 KB, 1728x1152 - viewed 483 times.)

* butterfly cap 004.jpg (977.98 KB, 1728x1152 - viewed 490 times.)
Logged

The life of the nation is secure only while the nation is honest, truthful and virtuous. Frederick Douglass
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.