The AM Forum
November 26, 2025, 03:41:27 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cookie cutters and $4, your thoughts...  (Read 3807 times)
0 Members and 1 Guest are viewing this topic.
VE3GZB
Member

Offline Offline

Posts: 561


« on: May 25, 2011, 02:40:36 PM »

I like this guy's reasoning.

http://www.qsl.net/wb1gfh/antenna.html
Logged
Ralph W3GL
Contributing
Member
*
Offline Offline

Posts: 748



« Reply #1 on: May 25, 2011, 02:58:35 PM »


Yep, good stuff...  Joe is a member here on this forum...

 
Logged

73,  Ralph  W3GL 

"Just because the microphone in front of you amplifies your voice around the world is no reason to think we have any more wisdom than we had when our voices could reach from one end of the bar to the other"     Ed Morrow
K3ZS
Member

Offline Offline

Posts: 1037



« Reply #2 on: May 25, 2011, 03:51:50 PM »

Reminds me of my first antenna:  a roof mounted 40M dipole, a sawed off broomstick was the mast, the feedline was zip cord.   It probably cost no
more than a couple of dollars for the parts.   I did not know any better so the feedline was fed unbalanced, one side to ground the other to the output
of the transmitter.    I contacted just about every novice station I could hear.

Logged
KC4ALF
Member

Offline Offline

Posts: 91


« Reply #3 on: May 26, 2011, 08:21:10 PM »

My main station antenna is nothing more than Army Surplus Field telephone wire, bought by the 1/2 mile spool years ago at Aberdeen for $15.00! And insulators are scrap 1/2" plexiglass and salvaged telegraph insulators.
Logged
WD8BIL
Contributing
Member
*
Offline Offline

Posts: 4433


« Reply #4 on: May 27, 2011, 02:19:50 PM »

This says it all. Talk about giving up an AMEN!!!

From the article:
Quote
The plain and simple truth is that wire antennas for the HF bands were intended to be hand-made and not store-bought.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 17 queries.