The AM Forum
April 28, 2024, 03:07:57 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Spectrum Analyzer  (Read 1792 times)
0 Members and 1 Guest are viewing this topic.
W4MWK
Guest
« on: December 21, 2010, 11:43:27 PM »
Hey Guys,
I've been looking for the best spectrum analyzer program for use with my AM rig, I've tried a few programs, But don't know enough about the programs to make an intelligent choice, So I'm in need of help.
Thanks
Mike W4MWK

MERRY CHRISTMAS AND HAPPY NEW YEAR 
Logged
WA1GFZ
Member

Offline Offline

Posts: 11152
« Reply #1 on: December 22, 2010, 10:29:16 AM »
single band Softrock converter with Flex software is very accurate. OR You can set it up to monitor 455 kHz IF and operate all bands. Set the RX to manual AGC when you monitor so the AGC doesn't pump.
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Spectrum Analyzer
« previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.065 seconds with 18 queries.