The AM Forum
March 28, 2024, 03:06:47 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Wiring or Schematic for SB 220 Transformer 54-237  (Read 3174 times)
0 Members and 1 Guest are viewing this topic.
WD8BIL
Contributing
Member
*
Offline Offline

Posts: 4409


« on: December 02, 2010, 02:29:15 PM »

I'd like to see the wiring diagram for this tranny I have.
It has the SB 220 p/n stamped on it but I have no info.
A 1KW power tranny would be nice.

Buddly
Logged
Ralph W3GL
Contributing
Member
*
Offline Offline

Posts: 748



« Reply #1 on: December 02, 2010, 03:16:25 PM »



   Bud,

   That transformer has dual tapped primary's for 115/230 input
   giving it a 500 volt boost when switching  from "CW/TUNE" to "SSB"
   mode.  It is designed for voltage doubler service.

   The color codes are as follows:
    Primary 1 :   low end: Black            tap: Blk/Yellow    high: Yellow
        "      2 :        "     : Black/Green    "  : Blk/Red          "  : Blue
  
    Secondary:   High end: Red           Low end:  Red/Yellow    
  
    Wire both primary's (full windings) for 2500 volts in doubler service
     Switch to taps for 3KV doubler output.

     There's a schematic at "www.w6kan.com/sb220.html"...

     It's a nice piece for it's purpose...
    
Logged

73,  Ralph  W3GL 

"Just because the microphone in front of you amplifies your voice around the world is no reason to think we have any more wisdom than we had when our voices could reach from one end of the bar to the other"     Ed Morrow
WD8BIL
Contributing
Member
*
Offline Offline

Posts: 4409


« Reply #2 on: December 02, 2010, 03:58:33 PM »

Thanks Ralph.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.031 seconds with 18 queries.