The AM Forum
April 28, 2024, 06:00:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 4-1000 GG Intermod specs  (Read 1686 times)
0 Members and 1 Guest are viewing this topic.
k7yoo
Member

Offline Offline

Posts: 405


WWW
« on: October 18, 2010, 04:35:28 PM »
Awhile back a thread was started about amp tubes--which was well covered and resulted in the posting of an Eimac bulletin regarding GG use of the 4X1. Are there any charts/specs that show IMD products in the GG configuration?

Skip
Logged
KM1H
Contributing
Member
*
Offline Offline

Posts: 3519
« Reply #1 on: October 18, 2010, 07:47:13 PM »
None that Ive seen but some tests I ran years ago show IMD  in the -33 to -40dB range depending on bias settings and over a 3000-6000V range. The exciter was a TS-830S at 110W out on 20M. Some pulls were worse.

Carl
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: 4-1000 GG Intermod specs
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.049 seconds with 18 queries.