The AM Forum
May 05, 2024, 05:56:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Johnson Invader 200 and 2000 Question  (Read 2210 times)
0 Members and 1 Guest are viewing this topic.
n2len
Member

Offline Offline

Posts: 205
« on: October 04, 2010, 10:59:40 PM »
Awaiting the arrival of the 2 transmitters...
Question:

The serial number on my Invader 2000 is #18. A very early revision. I am not sure which version of schematics is the correct one. The original manual is comming with the Invader with several others.

I want to eventually perform all of the necessary circuit updates.

Are there any OFFICIAL factory service/circuit sheets out there anywhere?

I have this online information...
http://www.boatanchors.org/Invader.htm

Regards,
Len N2LEN
Logged
The Slab Bacon
Member

Offline Offline

Posts: 3929
« Reply #1 on: October 05, 2010, 08:32:34 AM »
the most important one is the VFO updates / mods. Mine is an early one also, without them the VFO will take off to wherever it wants to. If you cant find them, let me know and I'll figger a way to get them to you.
Logged
"No is not an answer and failure is not an option!"
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Johnson Invader 200 and 2000 Question
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.052 seconds with 18 queries.