The AM Forum
April 28, 2024, 03:47:47 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
« previous next »
  Print  
Author Topic: Need help setting up DAP and stopping the RFI  (Read 13245 times)
0 Members and 1 Guest are viewing this topic.
Mike/W8BAC
Contributing
Member
*
Offline Offline

Posts: 1042



WWW
« Reply #25 on: August 02, 2010, 03:33:43 PM »
Try a new, clean #2 pencil eraser to burnish the gold contacts on the board. Sometimes a careful cleaning will help. Don't touch the contacts with your fingers after cleaning. Refit the board dry.
Logged
ke7trp
Contributing
Member
*
Offline Offline

Posts: 3659
« Reply #26 on: August 02, 2010, 04:38:54 PM »
ITs not dirty contacts. Its a design flaw of a 35 year old piece of gear. The tabs get loose and dont fit snug. Alot of people soldered them in with wires.  I wanted to see if anyone had any other suggestions before I try to build up the tabs with solder. thanks for the tip

C
Logged
Pages: 1 [2]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Need help setting up DAP and stopping the RFI
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.06 seconds with 19 queries.