The AM Forum
December 07, 2024, 06:44:28 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: What are you using for 40/80/160 antenna?  (Read 17966 times)
0 Members and 1 Guest are viewing this topic.
WD8BIL
Contributing
Member
*
Offline Offline

Posts: 4413


« Reply #25 on: April 05, 2010, 09:45:08 AM »

160/40 - Inverted L, 45' vertical x 90' horizontal. Tuner right at the base.
75/80 Dipole @ 60', coax fed
Logged
flintstone mop
Contributing
Member
*
Offline Offline

Posts: 5048


« Reply #26 on: April 05, 2010, 11:24:30 AM »

As you can see there are the exotic and erotic aerials. You can be whirl wide or somewhat local or DX can happen.
A VEE is convenient and can give you DX. If your goal is strictly DX then you should look at verticals or stacked antennas like Tom.

BUT The HuzMan has a very nice all around solution that works very well and been known to hop an ocean or two.

Phred
Logged

Fred KC4MOP
KL7OF
Member

Offline Offline

Posts: 2323



« Reply #27 on: April 05, 2010, 11:56:05 AM »

I use the top strand on the barb wire fence that circles my stump ranch for transmit...The forward gain comes from the wall socket...beverages for rx
Logged
N3DRB The Derb
Guest
« Reply #28 on: April 05, 2010, 07:28:28 PM »

planned for 160:


* Topband_160m_T_Antenna1.jpg (192.14 KB, 1024x724 - viewed 562 times.)
Logged
KA2QFX
Member

Offline Offline

Posts: 236

Mark


« Reply #29 on: April 05, 2010, 10:28:21 PM »

Fullsize dipoles for 160, 75 and 40 using single coax feed and homebrew 1:1 balun.  Elements are paced 5" apart using 1/2" PVC as spreaders.  Works well, very well considering it's only up about 50ft. at the apex.
Logged
flintstone mop
Contributing
Member
*
Offline Offline

Posts: 5048


« Reply #30 on: April 06, 2010, 03:54:33 PM »

Fullsize dipoles for 160, 75 and 40 using single coax feed and homebrew 1:1 balun.  Elements are paced 5" apart using 1/2" PVC as spreaders.  Works well, very well considering it's only up about 50ft. at the apex.


Another nice solution that would not be a far out project.

Fred
Logged

Fred KC4MOP
ke7trp
Contributing
Member
*
Offline Offline

Posts: 3654



« Reply #31 on: April 06, 2010, 04:36:39 PM »

Lots of guys have been switching to maypoles.   They seem to have a big signal here in the state. Now you can by fiberglass pushup pole masts cheap..  You could put this up in an afternoon easy.


http://www.qso.com/westsat/Maypole/index.html

Also.. I have been hearing a few guys using the S9 vertical.  Its about $150 with Ground radial kit  One guy can put it up. Not sure about the performance on 80 with the big coil but on 40, they sure put out a big signal. 

http://www.s9antennas.com/s9v.html





http://www.qso.com/westsat/Maypole/index.html


Logged
W9GT
Member

Offline Offline

Posts: 1240


Nipper - Manager of K9 Affairs


WWW
« Reply #32 on: April 06, 2010, 05:27:45 PM »

160 M: #1 Inverted L 80' vertical 55' horizontal , #2 Loaded inv vee dipole 70' apex

80/75M: #1 3 wire dipole up 60' fed with open wire feeders and remote tuner,
#2 130' dipole @ 35' fed with 450 ohm line and tuner

40 M #1 pair of full wave loops diamond-shaped @ 70' apex, #2 same as 75M #2

73,  Jack, W9GT
Logged

Tubes and Black Wrinkle Rule!!
73, Jack, W9GT
W1GFH
Guest
« Reply #33 on: April 06, 2010, 07:37:42 PM »

I run 47 feet of barbed wire, I use a cobra snake for an end tie...
Logged
KX5JT
Contributing
Member
*
Offline Offline

Posts: 1948


John-O-Phonic


« Reply #34 on: April 06, 2010, 09:28:02 PM »

I run 47 feet of barbed wire, I use a cobra snake for an end tie...


Who do you love?
Logged

AMI#1684
WA2ROC
Contributing
Member
*
Offline Offline

Posts: 284


« Reply #35 on: April 07, 2010, 09:14:12 AM »

I use a "full wave" (300 feet of #14 wire) 80 meter loop, sorta triangular in shape, up about 40 feet between 7 trees, driven on one of the long sides with 25' of 450 ohm open wire directly to a Heathkit 2040 tuner in the shack.

The Apache doesn't do 160, so I use this on all the other bands with great success.
Logged

Dick Pettit WA2ROC 
Vintage Heathkit Equipment
If You Cannot Stand Behind Our Troops, Please Feel Free To Stand In Front Of Them!
W3RSW
Contributing
Member
*
Offline Offline

Posts: 3307


Rick & "Roosevelt"


« Reply #36 on: April 07, 2010, 10:18:16 AM »

Random wire, 180 or so ft., unknown exact horizontal length fed by single wire feeder about 1/3 out from end by "L" net homebrew match. Works 160 through 6.
Lobes on higher freqs. are so numerous that coupled with real losses and tree attenuators, it must look like a perfect circle.  Grin

Just about anything of reasonable length matched properly will load the aether up nicely.

Some have even heard 'it' on the air.
Logged

RICK  *W3RSW*
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.104 seconds with 19 queries.