Cushman tone generator schematic/manual

[WB6VHE]

Greetings All!

This is a long shot, but here goes:  I've acquired a Cushman CE-11 two-tone generator on ePay,
and it's DOA.  I worked for Cushman in the 70's and have a bunch of manuals, but of course I don't have
one for the CE-11!   Anybody out there who can help?  Perhaps another former Cushman employee,
or someone who used to run a two-way radio shop and had one of these units.  A schematic would
be the first priority, since at least then I can check power supply voltages and trace
signal paths.
Regards,
Ken
W5KFS
ex-WB6VHE

[Steve - WB3HUZ]

If you are willing to pay...

http://www.vintagemanuals.com/manual.php?manufacturer=Cushman&model=CE-11


Although $25 seems a bit much.

[WB6VHE]

Hi Steve, and thanks for the reply.  Yeah, I already saw that one, but wanted to avoid
paying through the nose any further...the price of the manual is almost as much as I
paid for the generator!  As a last resort, I might have to bite the bullet; however, I want to
tap the vast storehouse of knowledge that is the AM community first!
Regards,
Ken

[WB6VHE]

I bit it and shelled out the 25 bucks.  The law of supply and demand at work,
I guess!

[Mike/W8BAC]

I replied to this thread by mistake