|
Title: Cushman tone generator schematic/manual Post by: WB6VHE on November 04, 2008, 06:42:22 PM Greetings All!
This is a long shot, but here goes: I've acquired a Cushman CE-11 two-tone generator on ePay, and it's DOA. I worked for Cushman in the 70's and have a bunch of manuals, but of course I don't have one for the CE-11! Anybody out there who can help? Perhaps another former Cushman employee, or someone who used to run a two-way radio shop and had one of these units. A schematic would be the first priority, since at least then I can check power supply voltages and trace signal paths. Regards, Ken W5KFS ex-WB6VHE Title: Re: Cushman tone generator schematic/manual Post by: Steve - WB3HUZ on November 04, 2008, 07:22:19 PM If you are willing to pay...
http://www.vintagemanuals.com/manual.php?manufacturer=Cushman&model=CE-11 Although $25 seems a bit much. Title: Re: Cushman tone generator schematic/manual Post by: WB6VHE on November 04, 2008, 07:36:02 PM Hi Steve, and thanks for the reply. Yeah, I already saw that one, but wanted to avoid
paying through the nose any further...the price of the manual is almost as much as I paid for the generator! As a last resort, I might have to bite the bullet; however, I want to tap the vast storehouse of knowledge that is the AM community first! Regards, Ken Title: Re: Cushman tone generator schematic/manual Post by: WB6VHE on November 24, 2008, 01:32:09 PM I bit it and shelled out the 25 bucks. The law of supply and demand at work,
I guess! Title: Re: Cushman tone generator schematic/manual Post by: Mike/W8BAC on November 24, 2008, 05:41:31 PM I replied to this thread by mistake AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
|