The AM Forum
May 12, 2024, 03:49:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: NECWin Pro help  (Read 1925 times)
0 Members and 1 Guest are viewing this topic.
VE7 Kilohertz
Member

Offline Offline

Posts: 381
« on: November 28, 2007, 10:35:16 AM »
Hi Guys,

Installed NEC WIN Pro (v1.6) and I can't find a place to enter height above ground for the antenna. I can find ground characteristics but no height.

Very cool program with lots of power. Big learning curve.

Thanks

Paul
Logged
Women. Ya can't live with them......pass the beer nuts!
Steve - WB3HUZ
Guest
« Reply #1 on: November 28, 2007, 03:52:13 PM »
It is the Z cells (one for each end of the wire) in the spreadsheet, unless you are doing it the hard way and using text input.


Quote from: VE7 Kilohertz on November 28, 2007, 10:35:16 AM
Hi Guys,

Installed NEC WIN Pro (v1.6) and I can't find a place to enter height above ground for the antenna. I can found ground characteristics but no height.

Very cool program with lots of power. Big learning curve.

Thanks

Paul
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: NECWin Pro help
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.029 seconds with 17 queries.