The AM Forum
May 18, 2024, 01:11:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Heathkit HX-11 Meter  (Read 3221 times)
0 Members and 1 Guest are viewing this topic.
KA8WTK
Contributing
Member
*
Offline Offline

Posts: 872
« on: October 28, 2011, 08:59:56 PM »
Looking for a HX-11 meter.
Specs are 3 ma fullscale and 500 ohms.
Looks like the DX-40 meter, but has a slight taper to the body.
Don't know if the DX-40 meter is the same spec or not. If it is, I'll take one of those and make it fit.
Really don't care about condition if from HX-11. I have a good face and dial to put on it, just need a working meter.

Contact me at ka8wtk"AT"ohio.net

Thanks!

Bill
Logged
Bill KA8WTK
KA8WTK
Contributing
Member
*
Offline Offline

Posts: 872
« Reply #1 on: October 29, 2011, 03:22:27 PM »
BTW, I'll take just about any old meter that meets the specs above (3 ma full scale, 500 ohm) and fits the hole (2") I'll make my own dial. This is not a restoration job. I want to try it as a driver for the 4-400 rig.

Bill
Logged
Bill KA8WTK
Pages: [1]   Go Up
  Print  
The AM Forum  > AM CLASSIFIEDS > Wanted > Topic: Heathkit HX-11 Meter
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.034 seconds with 17 queries.