wavebourn
Guest
|
|
« on: May 16, 2007, 01:42:49 PM » |
|
|
|
|
Logged
|
|
|
|
WA1GFZ
Member
Offline
Posts: 11151
|
|
« Reply #1 on: May 16, 2007, 01:51:54 PM » |
|
I would move the small tubes back an inch or so. This will allow more room the wire them.
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #2 on: May 16, 2007, 02:07:48 PM » |
|
Thanks, interesting idea!
What if to move phase splitter tubes back one inch leaving indicators on the edge?
|
|
|
Logged
|
|
|
|
WA1GFZ
Member
Offline
Posts: 11151
|
|
« Reply #3 on: May 16, 2007, 02:41:50 PM » |
|
I would move the phase splitter tubes back between the input amp and output. This will allow more room to wire each socket. I don't like stacking components around tube sockets. Too hard to work on. I like all the parts on one plane.
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #4 on: May 16, 2007, 02:56:07 PM » |
|
I will order PCBs for each channel of a phase splitter. Here is the schemo: http://wavebourn.com/images/audio/gu50amp-phsp.gifCorrection: 6N1P will be loaded on 27K resistors instead of 56K and powered from unregulated 375V, 6N6P will be used instead of 6N1P Almost all stages are directly coupled for better stability on low frequency end.
|
|
|
Logged
|
|
|
|
W1GFH
Guest
|
|
« Reply #5 on: May 16, 2007, 03:25:55 PM » |
|
Is this for hifi/guitar consumers? If so, I'd leave the small tubes where they are, and mount them on a series of platforms made from L-brackets, arraged with the tallest in the middle (like an Olympic Gold Medal ceremony). I'd paint the chassis fire-engine red except for a bare strip of aluminum shaped like a "V". Also I'd add a few jeweled pilot lights.
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #6 on: May 16, 2007, 03:32:40 PM » |
|
Is this for hifi/guitar consumers? If so, I'd leave the small tubes where they are, and mount them on a series of platforms made from L-brackets, arraged with the tallest in the middle (like an Olympic Gold Medal ceremony). I'd paint the chassis fire-engine red except for a bare strip of aluminum shaped like a "V". Also I'd add a few jeweled pilot lights. Thank you! It is actually a vocal amp for concerts, 2X100W output. Also, I am going to target them as studio monitoring amps. Front panel will be made of Lexan. It will be fitted into a grilled 4U enclosure so all internals will be visible.
|
|
|
Logged
|
|
|
|
Rick K5IZ
Guest
|
|
« Reply #7 on: May 16, 2007, 03:37:22 PM » |
|
I'd be interested in hearing more about the studio monitoring aspects when it's complete. She's gonna be a beaut! Rick
|
|
|
Logged
|
|
|
|
k7yoo
Member
Offline
Posts: 404
|
|
« Reply #8 on: May 16, 2007, 03:51:41 PM » |
|
Leave the tubes out near the edge so you have enough room for the tank circuit components
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #9 on: May 16, 2007, 04:01:46 PM » |
|
I'd be interested in hearing more about the studio monitoring aspects when it's complete. She's gonna be a beaut! Rick
I can tell you now: unlike solid state amps it is immune to cellphones near speaker wires, it is the most significant advantage except warm tube sound. Thank you! I am going to order also perforated 4U enclosures for them, like Collins transmitters. The enclosure will be black, the chassis will be bright red. Front panel made of lexan, with pair of volume knobs, power switch, and safety "ignition" key, like on this my breadboard: http://wavebourn.com/images/audio/gu50ampbg.gifInput and output sockets will be on rear panel (2 for in, 2 for 4 Ohm, 2 for 8 Ohm, 2 for 16 Ohm) -- all TRS.
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #10 on: May 16, 2007, 04:03:53 PM » |
|
Leave the tubes out near the edge so you have enough room for the tank circuit components
Tank circuits will be flat to fit inside of 1U chassis, here are breadboards: http://wavebourn.com/images/audio/ps_bb.gif
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #11 on: May 16, 2007, 04:20:27 PM » |
|
Here is schemo of power supply (screen grids' and preamp regulator) http://wavebourn.com/images/audio/pyramidps.gifHowever I could use Zener diode, but 0A2 looks cool and visually indicates presence of a voltage Also, it looks nice in darkness... http://wavebourn.com/images/audio/wavebourntubepp.gifI will have another version: 4x 6L6GC per channel in relaxed mode, for 50W only per channel, with smaller output transformers for better clarity of details.
|
|
|
Logged
|
|
|
|
W1GFH
Guest
|
|
« Reply #12 on: May 16, 2007, 04:32:21 PM » |
|
Tolly, you do EXCELLENT fabrication work. I can't WAIT to see your version of a 100 watt AM phone transmitter.
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #13 on: May 16, 2007, 04:43:53 PM » |
|
Tolly, you do EXCELLENT fabrication work. I can't WAIT to see your version of a 100 watt AM phone transmitter.
Thank you Joe! I have an idea about screen modulated couple of GU-50 toobs, with AF feedback from antenna output. I'll try it later when my audio business is up and running.
|
|
|
Logged
|
|
|
|
|
wavebourn
Guest
|
|
« Reply #15 on: May 16, 2007, 07:04:00 PM » |
|
Yeah! LS-50 was developed by Telefunken for Hitler. Russian engineers took it from enemy and made own version GU-50. It is very linear ray pentode and excellent both for audio and radio. The guy on your link builds linear amplifiers using GU-50 tubes. On his page he is standing near his Uragan-1 gear that had not been finished because authorities thought the he can't use GU-43 tube that may give 2 KW of output power so it could be technically possible to break the rules despite the power tranny is up to 1 KW only! Uragan-2 is an amp made of mobile military transceiver R-140 Cube is amplifier with GU-74 output The rest is amplifiers with GU-50 outputs. Polew 4GU50 - 150-200W output FM, 650W SSB 3GU50 "Hi-End" - up to 450W SSB 2GU50 - 250W peak SSB
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #16 on: May 17, 2007, 01:46:37 AM » |
|
|
|
|
Logged
|
|
|
|
|
WA1GFZ
Member
Offline
Posts: 11151
|
|
« Reply #18 on: May 18, 2007, 12:54:07 PM » |
|
Chassis reminds me of a small block chevy.......from the '60s
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #19 on: May 18, 2007, 01:37:39 PM » |
|
Was it red? It is Joe's idea about red color.
|
|
|
Logged
|
|
|
|
W1GFH
Guest
|
|
« Reply #20 on: May 18, 2007, 02:01:05 PM » |
|
I'm sure you were planning to paint it red all along.
I like the "muscle car engine look" too. The "ignition key" is a great idea. Maybe you can find an excuse to run some heavy cable on top of the chassis (suggestive of ignition wires). Also maybe think about bringing some caps up top next time.
And how about a meter set up to suggest a tachometer, chrome trim ring, a red line, etc.
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #21 on: May 18, 2007, 02:10:48 PM » |
|
4X807 instead of 2xGU50 would defenitely need ignition cables.
|
|
|
Logged
|
|
|
|
The Slab Bacon
Member
Offline
Posts: 3929
|
|
« Reply #22 on: May 18, 2007, 02:36:16 PM » |
|
I really like the thumbnail indicator tube avatar!!
|
|
|
Logged
|
"No is not an answer and failure is not an option!"
|
|
|
wavebourn
Guest
|
|
« Reply #23 on: May 18, 2007, 03:58:58 PM » |
|
I really like the thumbnail indicator tube avatar!!
Thank you!
|
|
|
Logged
|
|
|
|
wavebourn
Guest
|
|
« Reply #24 on: May 18, 2007, 05:31:23 PM » |
|
|
|
|
Logged
|
|
|
|
|