Project update,
I receive an email from Jim WD5JKO, he suggest me take a look on a couple of 10 ohms cluster resistors on the filament of V1 6BL8 ( Mic amp. and VOX), I found 3 10 Ohms resistors in parallel on each side of the filament, I mesure the resistance and I have 2.5 ohms on each cluster, or 5 ohms in total, according to Ohms low, that suppose a drop in voltage to 4.05 volts, instead of 6.3V.
Well, I by pass those branches , and the transmitter como back to life, the VOX works OK, and Audio also are Ok, the only difference I noticed, is a more blinks on the limiter lamp, So Jim and I wondering why CE put those resistor to lower the filament voltage ?, maybe a fancy way to reduce the amplification gain of the tube?
Regards