The AM Forum
October 10, 2024, 11:58:26 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Class E drive and Duty Cycle for drive  (Read 5066 times)
0 Members and 1 Guest are viewing this topic.
M0VRF
Member

Offline Offline

Posts: 175


« on: November 25, 2020, 06:17:49 AM »

I'm sure Ive read somewhere 40% was the optimum drive level for diving the gates for class E.

I'd like confirmation as cant find the relative text on here or Steves website.

Could anyone point me towards and relative info?

Would be much appreciated.

Regards

J.
Logged
vk3alk
Member

Offline Offline

Posts: 255


« Reply #1 on: November 25, 2020, 05:30:59 PM »

Hi J.

Steve mentions it in the VFO part on his WEB site......

This article here https://people.physics.anu.edu.au/~dxt103/160m/class_E_amplifier_design.pdf probably has it but I don't seem to have the patience to read it anymore....


Wayne
Logged
steve_qix
Contributing
Member
*
Offline Offline

Posts: 2595


Bap!


WWW
« Reply #2 on: November 25, 2020, 11:13:09 PM »

Yeah, 40% at the gates is good.  As the duty cycle increases, the efficiency will go down somewhat.  This pertains to standard MOSFETs.   SiC MOSFETs actually work better with a duty cycle closer to 50% at least in my experience.

I did mention it on my site, but only in passing and in the VFO project overview.  I suppose it should be more front and center.
Logged

High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
ka1tdq
Member

Offline Offline

Posts: 1506


Red part turned in for a refund.


« Reply #3 on: November 26, 2020, 12:10:18 AM »

Don't fret too much about the exact number. I've made some really pretty waveforms with Chinese VFO's and guesswork. Class E is very forgiving to a certain extent. I started with a single FET rig and learned about everything by watching the gate and drain waveforms as I varied stuff. After that I felt confident to move onto the 8-FET version. I built a 24-FET rig after that but only put it on the air once. It scared me. Eight FETs in an enclosed chassis is good enough.

Jon

Logged

It’s not just values, it’s business.
M0VRF
Member

Offline Offline

Posts: 175


« Reply #4 on: November 26, 2020, 03:22:39 AM »

Thanks for the info.

I have 43% so will be happy with that.

Interesting that 50% is better for SiC, thanks for that Steve.

Regards to All.

J.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.066 seconds with 19 queries.