TCS transmitter power cable and power supply filament transformer

[N0WEK]

Does anybody have a power cable for the transmitter? It's got a 16 pin Anphenol connector on each end.

Also, I need a filament transformer for the power supply that I cooked this last weekend on the USS Torsk (SS-423), my old boat. That set is 1944 original to the boat, although I'm sure it was using the dynamotor supply then. The AC supply is from the late 1950s.

The transformer is T-303 and supplies 12.6 volt CT @ 3.9 amps and 15.1 volts at about an amp.

A cable short pulled about 8 or 9 amps through the 15 volt winding and a 2.25 amp selenium full wave bridge rectifier to cook the transformer, without blowing the 3 amp primary fuse or cooking the rectifier. I've got a hambone fix running it now but I'd like to get it back to original.