The AM Forum
April 28, 2024, 09:23:35 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Thordarson T-20A24  (Read 2103 times)
0 Members and 1 Guest are viewing this topic.
KG6UTS
Guest
« on: August 15, 2011, 07:10:19 PM »

Found a pair of these interstage xfmrs. Bunker of Doom catalog # 630 says 1:3 @20K pri/180K sec both ct. Anyone have paperwork or color code on these?

Thanks!

EdZ KG6UTS
Logged
KE6DF
Member

Offline Offline

Posts: 784


WWW
« Reply #1 on: August 15, 2011, 11:43:08 PM »

It shouldn't be too hard to figure out.

The manual says it has a center tapped primary and a split secondary.

So, using an Ohm meter  you can find three wires making  up the primary. The resistance between either end and the CT should add up to the resistance from end to end.

That should leave  you four wires for the two halves of the secondary and you can find out which wires make up each 1/2 of the secondary with the Ohm meter.

Then put a small AC voltage from a filament transformer into the primary and see which way you need to connect the two secondaries so the output voltages add.

Logged

W7TFO
WTF-OVER in 7 land Dennis
Contributing
Member
*
Offline Offline

Posts: 2525


IN A TRIODE NO ONE CAN HEAR YOUR SCREEN


WWW
« Reply #2 on: August 16, 2011, 12:00:56 AM »

Primary usually:  Brown-Red-Blue

Split secondary usually:  Green/Black twice

73DG
Logged

Just pacing the Farady cage...
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.078 seconds with 19 queries.