The AM Forum
April 29, 2024, 12:39:07 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Help on VIKING VALIANT ii parts  (Read 2186 times)
0 Members and 1 Guest are viewing this topic.
Knightt150
Contributing
Member
*
Offline Offline

Posts: 286
« on: July 11, 2011, 02:08:47 PM »
I need a 350pf door Knob cap at at least 1.5k volts for a valiant, the cap has been hit by lighting. It gose in the tank circuit so I think it will need the high voltage rateing. I don't want to build up a bunch of caps to come up with the value or voltage rateing. The one in there is about 1"x 1". For those of you who have a VALIANT schematic the cap is C39.

I will purchase one or tell me where to look.

John W9BFO
Logged
WD5JKO
Member

Offline Offline

Posts: 1997


WD5JKO
« Reply #1 on: July 21, 2011, 10:25:36 PM »

John,

  Check out the 400pf 7.5 Kv doorknob from this source:

http://www.mgs4u.com/RF-Microwave/doorknob-capacitors.htm

Good Luck,
Jim
WD5JKO
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Help on VIKING VALIANT ii parts
« previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.06 seconds with 19 queries.