The AM Forum
May 15, 2024, 06:12:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: How to assemble a rotary dial phone  (Read 10756 times)
0 Members and 1 Guest are viewing this topic.
KB2WIG
Contributing
Member
*
Offline Offline

Posts: 4468



« Reply #25 on: July 10, 2011, 06:43:12 PM »

   After a few days the phone company called and said they detected the load.    So they do check the lines.   

They can be quite tought to deal with.

http://www.youtube.com/watch?v=k9e3dTOJi0o


klc
Logged

What? Me worry?
Todd, KA1KAQ
Administrator
Member

Offline Offline

Posts: 4244


AMbassador


« Reply #26 on: July 13, 2011, 02:05:16 PM »

Ah, Sugarloaf. That tune sure brings back memories of nighttime radio listening back in the 70s. And Three Dog Night, Santana, etc.

The WE 102 is a neat phone but it was replaced pretty fast by the 202, probably for better stability. The round base was easier to pull over. Pure 'deco' styling that still looks great today.

I think there are sources for replacement cords; I need to check that out.

I've used these folks over the years for a number of things, including replacement cords:

http://www.phonecoinc.com/category.asp?map=3&group=misc&category=Cords&horh=home

You can get original configurations with spade lugs or cords with a modular connector on one end to plug into today's wall sockets. Plenty of other parts, too.

Phones are fun to play around with, easy to restore, and a great accessory for the radio room full of old tube gear. Still have a surplus TP-6-A desk phone here along with a mod 41 space saver which hangs in the radio room. Need to repair the rotary dial on the 41 as it doesn't dial reliably. Sometimes you get the number you dialed, sometimes you don't.

The TP-6-A always draws compliments for wonderful fidelity. Not bad for a 1940s phone.

Logged

known as The Voice of Vermont in a previous life
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.051 seconds with 19 queries.