The AM Forum
April 28, 2024, 12:10:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
« previous next »
  Print  
Author Topic: To switch or NOT to switch?  (Read 12892 times)
0 Members and 1 Guest are viewing this topic.
Steve - K4HX
Guest
« Reply #25 on: June 19, 2011, 12:23:06 PM »
It's good to know the limits of your measurement system. When I was working in the EMI field years ago, we always used double-shielded coax to minimize or hopefully eliminate low level signal corruption.
Logged
WA1GFZ
Member

Offline Offline

Posts: 11152
« Reply #26 on: June 19, 2011, 07:38:22 PM »
Even RG223 with BNC connectors is a problem for me at work.
Logged
Pages: 1 [2]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: To switch or NOT to switch?
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.059 seconds with 19 queries.