The AM Forum
May 13, 2024, 04:52:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: how to assemble the twinax plug for use with the R-390A?  (Read 2133 times)
0 Members and 1 Guest are viewing this topic.
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 8267



WWW
« on: August 20, 2010, 10:19:24 PM »
Does anyone have pictures or instructions of how to put all the pieces together, how to strip the twinax cable, etc? I bought some new-in-bag Amphenol 82-5589-RFX from fairradio.com and I don't know in what order and facing direction the innards go in. Bunch o' spool like things and a washer and gasket.
Logged
Radio Candelstein - Flagship Station of the NRK Radio Network.
Pete, WA2CWA
Moderator
Member

Offline Offline

Posts: 8085


CQ CQ CONTEST


WWW
« Reply #1 on: August 20, 2010, 10:25:26 PM »

http://www.amphenolrf.com/pdf/293.pdf
Logged
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
ke7trp
Contributing
Member
*
Offline Offline

Posts: 3654
« Reply #2 on: August 21, 2010, 12:59:43 AM »
There are right angle connectors that go from twinax to pl259 on the net. I got a few of them.  My Friend made an adapter for me out of that same plug you have into Coax.  You just put one pin to the shield and have the center go to the other pin.  Then you can put the connector of your choice on the other end.

C
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: how to assemble the twinax plug for use with the R-390A?
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 19 queries.