The AM Forum
May 11, 2024, 09:42:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Need some big ass micas  (Read 1618 times)
0 Members and 1 Guest are viewing this topic.
N3DRB The Derb
Guest
« on: September 22, 2009, 09:25:53 AM »
anyone have some .001~.002 5KV working voltage brown molded micas out of their junk box they can stone me with? cant bypass my plate chokes till I get um.  Tongue highest voltage I have is 2500 and thats not thick enough.
Logged
The Slab Bacon
Member

Offline Offline

Posts: 3929
« Reply #1 on: September 22, 2009, 09:39:23 AM »
I gotta look, but I might have some. If I do I'll toss them into the N3DRB pile that is starting to accumulate.
Logged
"No is not an answer and failure is not an option!"
N3DRB The Derb
Guest
« Reply #2 on: September 22, 2009, 12:26:32 PM »
I approached wifey about getting over there but she's working solid until Oct 1st. Then she is taking 2 whole weeks off at once!  Cheesy

Only working on RF Decks now. When I get the punch from Dennis I can cut some 4-400 holes. Until then it's only 813 size.
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > QSO > Topic: Need some big ass micas
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.062 seconds with 19 queries.