The AM Forum
May 14, 2024, 12:46:38 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: DX100 Crystal Oscillator problem  (Read 1889 times)
0 Members and 1 Guest are viewing this topic.
W6OOQ
Guest
« on: February 21, 2009, 05:48:17 PM »
On my DX100...VFO works fine but I cannot get the crystal oscillator to function. A new tube was installed ,components checked and wiring checked ...It all seems OK BUT Huh Has anyone had a similar problem ?? Thanks, Bob
Logged
Jim KF2SY
Member

Offline Offline

Posts: 290
« Reply #1 on: February 23, 2009, 10:14:25 AM »

1.)  Did you swap with a different xtal.?
2.) Did you clean the xtal/vfo switch ?

On this thread below, the root cause was a dirty xtal/vfo switch.
He had the opposite problem of ok xtal drive but no vfo drive.

Good luck.

http://amfone.net/Amforum/index.php?topic=18011.0
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: DX100 Crystal Oscillator problem
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.062 seconds with 19 queries.