The AM Forum
June 01, 2024, 06:46:23 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Modify a FT-902dm  (Read 3182 times)
0 Members and 1 Guest are viewing this topic.
Jerry-n5ugw
Guest
« on: August 20, 2008, 09:59:27 AM »
Anybody modify the audio and balance modder in a FT-902dm for AM??? It works fair, but thought i'd check and see what others have done.
Logged
w4bfs
W4 Beans For Supper
Contributing
Member
*
Offline Offline

Posts: 1432


more inpoot often yields more outpoot
« Reply #1 on: August 22, 2008, 09:38:37 PM »
hi Jerry ... see you brung it here ... I am curious too ... (appropriate emoticon here) ...73 ...John
Logged
Beefus

O would some power the gift give us
to see ourselves as others see us.
It would from many blunders free us.         Robert Burns
Jerry-n5ugw
Guest
« Reply #2 on: August 25, 2008, 02:31:26 PM »
Not much response, Looks like adding the 500-600ohm input audio may be it.
Logged
w4bfs
W4 Beans For Supper
Contributing
Member
*
Offline Offline

Posts: 1432


more inpoot often yields more outpoot
« Reply #3 on: August 25, 2008, 02:36:27 PM »
hi Jerry ... just downloaded manual ... looks like the action is on pb1706A ... according to theory of op that they are unbal the bal-mod to allow am ...I don't have direct experience with this rig and hope someone who has will step up to the plate and hit a homer (simpson?) ...73 ... John
Logged
Beefus

O would some power the gift give us
to see ourselves as others see us.
It would from many blunders free us.         Robert Burns
Jerry-n5ugw
Guest
« Reply #4 on: September 08, 2008, 11:56:57 AM »
Looks like I'm the test case.
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Modify a FT-902dm
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.041 seconds with 18 queries.