The AM Forum
May 16, 2024, 05:22:24 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: thou shalt not zorch...  (Read 2435 times)
0 Members and 1 Guest are viewing this topic.
kf6pqt
Member

Offline Offline

Posts: 530
« on: June 24, 2007, 10:38:58 PM »
Cause I said not to!

Cheesy

* modtrannyrepairP1000096_1000.JPG (166.49 KB, 1000x750 - viewed 428 times.)
Logged
W6IEE, formerly KF6PQT
kf6pqt
Member

Offline Offline

Posts: 530
« Reply #1 on: June 24, 2007, 10:40:05 PM »
On second thought, maybe I should put a lil electrical tape on there, too?


Wink
Logged
W6IEE, formerly KF6PQT
W1GFH
Guest
« Reply #2 on: June 25, 2007, 11:07:45 PM »
So that's what the bottom of a Dixie 100 mod tranny looks like. Nice job on the harmonically-balanced oxygen-free teflon wire you spliced onto the old leads. The pass-thru hole seems a mite ragged. And those gouges in the work surface look like possums were using it for a dance floor.
Logged
kf6pqt
Member

Offline Offline

Posts: 530
« Reply #3 on: June 26, 2007, 12:27:10 AM »
A big possum DOES use it as a dance floor! At least he was dancing his way outta my yard after I fired numerous rounds from my softair pistol over his head...

Thats a cardboard cover on the bottom there...

That wire WAS darn expensive!!! Ten cents a foot from orchard supply hardware... highway robbery!

Wink

Heat shrink tubing By Harbor Freight...
Logged
W6IEE, formerly KF6PQT
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > QSO > Topic: thou shalt not zorch...
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.079 seconds with 19 queries.