Stainless Steel U Bolts

[Knightt150]

Where is a good source for STAINLESS STEEL U Bolts the ones used to clamp the mast pipe to my TR3 BELL rotor. The problem is the inside thread to thread is mine is 2 1/4 inches. You can buy 2 inch U bolts but not the 2 1/4. I need 1/4 inch threads also.

John W9BFO

[K6IC]

Hi John,

Try :
http://amfone.net/Amforum/index.php?topic=8306.0

Any might also ook at DX Engineering,  But McMasters is prob the best for selection.  Think they also have HDG U-Bolts.

72   GL  Vic

[Superhet66]

That is an odd ball size but this fella is Ham friendly and may have it.

http://www.rotorservice.com/

                                           Dylan.

[Pete, WA2CWA]

You can get it from MFJ/HyGain:
http://www.hy-gain.com/Product.php?productid=5038200
They have all the rotor parts for the CDE rotors.

[WBear2GCR]

You don't actually need U bolts, if you have two bolts and something cut or machined to go around the
mast. Like cut with a hole saw out of solid stock... fwiw.

                  _-_-bear