The AM Forum
June 18, 2024, 02:28:39 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Fisher Labs AM Marine Receiver  (Read 2038 times)
0 Members and 1 Guest are viewing this topic.
W2JBL
Member

Offline Offline

Posts: 680
« on: October 16, 2016, 07:46:05 PM »
I have had this critter for about 30 years and finally decided to get it going again, but lost the schematic. The Fisher Labs Model JG is a 1.6 to 8 MC AM marine receiver, crystal controlled. Built about 1950. It was meant to be mated to a transmitter, and has a muting jack on the rear. I can't find the info on how to jumper the voltage selector jumper plug, which has options for 6, 12, 24, or 32 volt filament. Anybody have info on this?

* FISHER JG.JPG (1450.57 KB, 4032x2272 - viewed 419 times.)
Logged
W2JBL
Member

Offline Offline

Posts: 680
« Reply #1 on: October 16, 2016, 07:46:43 PM »
Oops! Wrong picture. Try this one...
Logged
W2JBL
Member

Offline Offline

Posts: 680
« Reply #2 on: October 16, 2016, 07:51:18 PM »
maybe I'll get it right this time- here ya go

* Fisher Model JG.JPG (1790.47 KB, 4032x2272 - viewed 475 times.)
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > QSO > Topic: Fisher Labs AM Marine Receiver
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.043 seconds with 18 queries.