The AM Forum
December 02, 2024, 08:25:07 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: SiC-Mosfets  (Read 4852 times)
0 Members and 1 Guest are viewing this topic.
DMOD
AC0OB - A Place where Thermionic Emitters Rule!
Contributing
Member
*
Offline Offline

Posts: 1806


« on: December 06, 2022, 09:14:27 PM »

SiC-Mosfets

This article may be of interest to those in this subforum.

https://www.digikey.com/en/articles/how-to-apply-third-generation-sic-mosfets-to-power-designs?utm_medium=email&utm_source=tnl&utm_campaign=128342_TNL2212A&utm_content=article2learnmore_US&utm_cid=11457732&mkt_tok=MTQ0LU5DQi0wMzAAAAGIhsUpI2q8SU1-1NZ82qciNPmGez7uGdCVI2dIpBinqPf3uVpx9upGgL73TLJ6oTZQ4tRQHU6bsEwk4LLzlGONIIOz3ivg99jCvwzFUZvivpI7LXOOl1IuCfqb

Phil
Logged

Charlie Eppes: Dad would be so happy if we married a doctor.
Don Eppes: Yeah, well, Dad would be happy if I married someone with a pulse.NUMB3RS   Smiley
WD5JKO
Member

Offline Offline

Posts: 2002


WD5JKO


« Reply #1 on: December 07, 2022, 06:03:23 PM »


Hi all,

I work for a company near Boston that makes Ion Implant machines for use in the Semiconductor Industry.

The SIC wafer implants differ from Silicon wafer implants in a big way. One major difference is with SIC, the wafers are heated up to between 450 to 700 degrees Celsius prior to ion implant, whereas with Silicon, the wafers are usually cooled to be at 25 Celsius or less.

I attach a photo taken from that linked video. There is some neat video showing the ion implant process.

https://youtu.be/z4CR9d5QQIU

Jim
Wd5JKO


* SIC Wafer at 700 Celsius.jpg (89.22 KB, 1009x553 - viewed 329 times.)
Logged
K9MB
Member

Offline Offline

Posts: 363


« Reply #2 on: December 08, 2022, 11:28:35 AM »

Interesting devices.
Looking at the specs, they look promising.
The only things that give pause to me are the Rg which is 10ohms. Clocking at a high speed would generate some heat there, and the SOA seems sharp and narrow.
I am looking at it as a possible replacement for the venerable old FQA11C90.
It has a much slower switch rate and higher input capacitance, but the SOA is broad giving it toughness under stress that explains it’s longevity.
Rg on the 11c90 is not published, but similar devices are about 3 ohms, I think.
The very large chip on the older device also helps with heat dissipation.
I expect that SIC and GaN will prevail in the end, however…
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 18 queries.