The AM Forum
March 28, 2024, 02:12:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Large old cutler-hammer panel switches needed for restoration  (Read 2245 times)
0 Members and 1 Guest are viewing this topic.
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 8308



WWW
« on: June 25, 2021, 09:58:01 PM »

Looking for six of these switches to replace those in the COL Tucker transmitter.

These are Cutler-Hammer part number 8781K3. It's a SPST switch.

The same basic switch was made by a few manufacturers. I think they are rated 35A.
Others will work if they can perform a SPST on-off function and have the same mounting and front appearance.
A similar unit is the 8782K9 shown which is SPDT.
I don't mind the radium bead tips or not, as long as the glass beads are not cracked.

Thank you!


* Cutler-Hammer_8781K3.jpg (160.36 KB, 925x1635 - viewed 294 times.)

* Cutler-Hammer_8782K9.jpg (132.19 KB, 925x1369 - viewed 255 times.)
* 8781K3 Electronics-1951-01-OCR-Page-0290.pdf (95.47 KB - downloaded 159 times.)
Logged

Radio Candelstein - Flagship Station of the NRK Radio Network.
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 8308



WWW
« Reply #1 on: October 02, 2021, 08:47:04 PM »

I am still looking for these switches
Logged

Radio Candelstein - Flagship Station of the NRK Radio Network.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.032 seconds with 18 queries.