The AM Forum
April 18, 2024, 03:11:50 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Hammarlund HQ-180 Front Panel Question  (Read 1221 times)
0 Members and 1 Guest are viewing this topic.
WA2SQQ
Contributing
Member
*
Offline Offline

Posts: 1092
« on: March 10, 2021, 10:59:40 PM »
Decided to clean up my 180’s front panel. I had a few spots that I removed using a 50-50 solution of isopropyl alcohol and water. I immediately noticed that the panel looked a bit more shiny, not too surprised since I’m the original owner. Than I started wondering if Hammarlund possibly had some sort of coating, perhaps anti glare, that I managed to remove.I’m seeing a similar sheen around the main tuning dial where fingers would rub. Any thoughts?
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Hammarlund HQ-180 Front Panel Question
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.