The AM Forum
March 28, 2024, 06:09:44 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: PWM Generator Board  (Read 3109 times)
0 Members and 1 Guest are viewing this topic.
N4LTA
Contributing
Member
*
Offline Offline

Posts: 1075


« on: August 14, 2019, 08:18:12 PM »

I am in the process of building a PWM Modulator and power supply. I plan on experimenting with several PWM chips. I have two boards made, one for the chip the Steve uses and one for the
Linear Technology SMT chip LTC 6992-1.

Just finished the LTC 6996-1 board and will test it after checking it again. I mounted the chip on the back side of the board.It is tiny. I had two and the first one flew off into never never land
while trying to install it.


* pwm board.jpg (55.15 KB, 640x480 - viewed 818 times.)

* pwm smt.jpg (74.37 KB, 640x480 - viewed 824 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.037 seconds with 18 queries.