Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
PWM Generator Board

The AM Forum
December 07, 2021, 10:03:23 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: PWM Generator Board  (Read 1787 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 1059

« on: August 14, 2019, 08:18:12 PM »

I am in the process of building a PWM Modulator and power supply. I plan on experimenting with several PWM chips. I have two boards made, one for the chip the Steve uses and one for the
Linear Technology SMT chip LTC 6992-1.

Just finished the LTC 6996-1 board and will test it after checking it again. I mounted the chip on the back side of the board.It is tiny. I had two and the first one flew off into never never land
while trying to install it.

* pwm board.jpg (55.15 KB, 640x480 - viewed 550 times.)

* pwm smt.jpg (74.37 KB, 640x480 - viewed 545 times.)
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.03 seconds with 18 queries.