The AM Forum
October 15, 2024, 12:46:58 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Source for reasonably-priced, chassis-mount RCA ceramic phono jacks?  (Read 2794 times)
0 Members and 1 Guest are viewing this topic.
W2FAL
Guest
« on: January 12, 2007, 11:38:00 AM »

Maybe it's because I haven't bought any in a while, but $4.25 each, from the only on-line source I could find, seems high for a chassis-mount ceramic phono jack.

Can anyone point me in the direction of a better buy?

Thanks,

     Frank, W2FAL
Logged
WBear2GCR
Member

Offline Offline

Posts: 4143


Brrrr- it's cold in the shack! Fire up the BIG RIG


WWW
« Reply #1 on: January 12, 2007, 12:02:30 PM »

Ummm... think this belongs in the Tech section... but:

- ceramic? no one uses "ceramic" RCAs anymore.
- check Mouser and Digikey for standard nickel plated "switchcraft" type RCAs - plastic insulation.
- the standard RCA in use these days, high quality type, is gold plated and has Teflon (R) insulation which goes all the way through the body.

The old ceramic ones had ceramic only in the front, and fiber material at the rear - not very good.

I think Mouser & Digikey may also carry the fancier types, but try looking around at the surplus and audio suppliers for the gold plated ones with the Teflon (R) insulation...

           _-_-WBear2GCR
Logged

_-_- bear WB2GCR                   http://www.bearlabs.com
W2FAL
Guest
« Reply #2 on: January 12, 2007, 01:10:17 PM »

Figures...my first post and I get it wrong.

Anyway, this is my attempt to keep a Navigator as original as possible.  This is the rf output jack and the ceramic is cracked.  (Yes, I know it doesn't do AM, but as a member of this group says, "CW is just a narrower version of AM".) 

Now to find an authentic meter....
Logged
WA1GFZ
Member

Offline Offline

Posts: 11151



« Reply #3 on: January 12, 2007, 01:15:36 PM »

How about putting a BNC connector in the hole
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.059 seconds with 19 queries.