Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Sola Transformer Information

The AM Forum
July 16, 2020, 12:51:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: Sola Transformer Information  (Read 2139 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 85

« on: December 03, 2006, 02:00:00 PM »

anyone have any information on a Sola 731-013 Filament Tranny? Its marked in magic marker
10V but I don't know the current rating. I'm needing a 10V CT 10A for a project.

thanks in advance

Ronnie - W5SUM

I got my Extra the old fashioned way, I earned it.

Offline Offline

Posts: 11152

« Reply #1 on: December 03, 2006, 08:52:12 PM »

Check the output windings. Usually sola transformers need a cap across the resonant winding so it will regulate. Start with 2 or 3 uf at 600 VAC cap. Load it to 10 amps and check the output voltage and see how hot it gets.
A good one will hold regulation between 85 to 140 volt input.
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.054 seconds with 19 queries.