The AM Forum
November 04, 2024, 08:11:59 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: FS: ECCO Corp T-368F  (Read 2322 times)
0 Members and 1 Guest are viewing this topic.
k6rbk
Member

Offline Offline

Posts: 1


« on: September 06, 2024, 11:11:54 AM »

This T-368F is in good working order. The plate relay time delay tube went bad and is presently temporarily bypassed as a replacement has so far been pretty difficult to source. I obtained this transmitter around 10 years ago and have performed various restoration work and repairs over the years (new wire loom retainers, repaired the HV spring contacts, etc).

Includes a spare set of 4-100s (modulators), an M-29 carbon mic, spare plate current meter, and various operating/service manual materials.

The R-390A shown in the photo is not included; however I do have another R-390A (working but in need of service) that I'm open to selling.

Asking $1200.  Located in Big Bear City, CA.


* IMG_4947.JPEG (742.07 KB, 1536x2048 - viewed 115 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.03 seconds with 18 queries.