Henry 2000d generator

[Detroit47]

I recently acquired a Henry 2000d 27mhz generator. I have no documentation I am looking for a schematic and parts list. The original manual would be great.

Johnathan N8QPC

[W1ITT]

https://www.rfparts.com/radioamp-service/radioampparts-henryradio/sm1000d.html

Looks like RF Parts will sell you a reprint of the manual..
73 de Norm W1ITT

[Detroit47]

I would prefer a free PDF. I know there is one around somewhere, but I will pay if I have to. Thanks for the information. I did a Google search I am surprised that didn't turn up.

Johnathan N8QPC

[W1ITT]

It's been my experience that DuckduckGo searches deeper than GooGoo which seems to have odd agendas.

73 de Norm W1ITT

[Steve - K4HX]

IIRC, those were built similarly to the Henry amateur band amps of the era. Of course there was no bandswitch. I had a 13 MHz Henry in year past (just the amp, no power supply). That parr of the schematic is pretty easy to figure out. I ended up parting it out.

[Detroit47]

I have the complete unit and it is operational. I had a discussion with a fellow at Henry and he is providing me with what I wanted. I could have just winged it but this was easier. Plus it was cheaper than RF parts. I am the stereotypical cheap ham. I'm not rich folk like y'all.

Johnathan N8QPC

[KD6VXI]

I have the complete unit and it is operational. I had a discussion with a fellow at Henry and he is providing me with what I wanted. I could have just winged it but this was easier. Plus it was cheaper than RF parts. I am the stereotypical cheap ham. I'm not rich folk like y'all.

Johnathan N8QPC

I'm a little faster than Henry.    Was out of town / on the road and had to get the VPN working to get access to the files back home.  Here ya go, it's a crappy copy, but it works.  I have some other pages I can provide that are better, but all around the same.


Enjoy.  Made a living off these things for awhile.

--Shane
WP2ASS / ex KD6VXI

[KD6VXI]

I have some other generator schematics and service manuals as well..  Almost all based on the Henry line and renamed, up to 5kw (with the difference between the 3000 and 5000 being a change from 4-250 driver to 4-400 and the 5kw has a pair of plate xformers vs a single for the 2000 and 3000.

The 2000 runs a 4-65 driver or a 12 volt 2 transistor driver.  The 3000 runs a pair of 28 volt devices, but at 14 volts.  The 5000 runs the same driver at 28 volts.

They used Varian and MRF devices.  Usually MRF devices are later builds.

Plate modulation the driver or even scream modulation a 4-400 swapped in for the 4-250 makes a wonderful legal limit self contained rack mnt xmitter.

Word to the wise.  If the choke isn't shorted, immediately lift both the choke and plate xformer from the chassis.  Those ECA iron just suck!  They very easily short.

I usually yank the choke, change to a different cap and make it a fwb cap input.  That will give 6kv on the plate and you can make legal limit with a Ranger.  A full Viking or valiant will be 3db or better above legal limit.

I like these.

--Shane
WP2ASS / ex KD6VXI

[Detroit47]

Thanks Shane

I am  not quite sure of my plan for this yet. Th 3000 is worth more.than what I paid for it.

 Johnathan N8QPC

[W7TFO]

Hi John,

Is your Henry 3ph or single phase?

73DG

[Detroit47]

It is single phase. The RF deck was designed by Rube Goldberg. I guess it was made to accommodate a changing load.

Johnathan N8QPC

[W7TFO]

Ah, that is prolly good in your case.

I'm always looking for 3ph iron in that power range.

73DG

[Detroit47]

I wish I.had known that I had a  Collins amplifer / trasmitter single 4cx5000..
3 phasee 220. I traded it off I couldn't use it.

Johnathan N8QPC