The AM Forum
December 04, 2024, 08:34:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: LS-3 SPEAKER  (Read 2855 times)
0 Members and 1 Guest are viewing this topic.
W9BHI
Member

Offline Offline

Posts: 391



« on: September 25, 2023, 11:16:04 AM »

What size jack is supposed to be in an LS-3 speaker?
I have two of them and one has a .250 jack and one has a .210 jack.
Both appear to still have have the protective coating on the solder connections. Any thoughts?
Thanks, Don W9BHI
Logged
WB6NVH
Member

Offline Offline

Posts: 272


WWW
« Reply #1 on: September 30, 2023, 03:16:26 PM »

It seems to have originally been the smaller style that fits the PL-68 male microphone plug. I always thought that odd and when I got an LS-3,if there was just a hole there, I would put in the standard 1/4 inch jack for a PL-55 plug.
Logged

Geoff Fors
Monterey, California
N8ETQ
Member

Offline Offline

Posts: 791


Mort


« Reply #2 on: October 04, 2023, 11:00:32 AM »

Hello,

 My R-388 has both size jacks on the FP.  The .250"
one is labled "PHONES" the other is labled "speaker".

 My BC-312 has 3 x .210 size jacks, one labeled
"SPEAKER  2nd Audio"  and two labled "PHONES 2nd Audio".

  So I dont know, Perhaps it just comes down to
the Radio Set they were purchased for.

73
Dan  N8ETQ   CLE.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.066 seconds with 18 queries.