The AM Forum
April 25, 2024, 06:52:38 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: HW-100  (Read 3452 times)
0 Members and 1 Guest are viewing this topic.
rozradio
Guest
« on: June 06, 2005, 06:41:45 PM »
I Gang:

 me agn. I bin busy reworking the HW-100  C/Boards. What a mess, tube sockets with no Solder, cold joints, missing Components etc etc. The RF driver board was the worst. Removed the Diodes X4 from mod. board. All boards need a good cleaning. Can't believe it worked bk then, if it did at all.

Thanx agn for the help

Is there a way to add AM mode for RX..?

73... Richard/VA3VJC
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: HW-100
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.079 seconds with 17 queries.