The AM Forum
October 15, 2024, 01:04:40 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Source for 1000V Wire  (Read 2183 times)
0 Members and 1 Guest are viewing this topic.
W0PWE
Member

Offline Offline

Posts: 10


« on: April 13, 2023, 12:09:05 PM »

I am looking for a good source of wire rated for 1000V or better. I need to replace some of the lead wires coming out of an old TV transformer.  I will also need some to use as hook up wire and to run B+ from the power supply box to the transmitter box. The project is a 6146 transmitter so B+ will be about 750V.

I don't care much about color or insulation type as long as it rated for the voltage. And I would like to be able to buy it in small quantities. Can anyone recommend a source for such wire?
Logged
w7fox
Member

Offline Offline

Posts: 106


« Reply #1 on: April 13, 2023, 12:20:11 PM »

Mouser
Logged
KD1SH
Member

Offline Offline

Posts: 854



« Reply #2 on: April 13, 2023, 12:40:29 PM »

Might be overkill, but I've found this useful:
https://www.amazon.com/gp/product/B01IX3B8YC/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
Logged

"Gosh, Batman, I never knew there were no punctuation marks in alphabet soup!"
—Robin, in the 1960's Batman TV series.
K2GTM
Contributing
Member
*
Offline Offline

Posts: 47



« Reply #3 on: April 13, 2023, 01:13:52 PM »

You could use Pomona 6733 test lead wire rated up to 10kV.  It's not that expensive and I like to keep some on hand for making up test leads.  I'm not so trustworthy of the voltage ratings of the "off-brands" available on Amazon, eBay, etc.
Logged
W1RKW
Contributing
Member
*
Offline Offline

Posts: 4419



« Reply #4 on: April 13, 2023, 04:03:03 PM »

https://www.amazon.com/10Ft-30KV-18AWG-Voltage-Rubber-Silicone-Telsa/dp/B0747BKTNZ?th=1
Logged

Bob
W1RKW
Home of GORT.
KD6VXI
Contributing
Member
*
Offline Offline

Posts: 2680


Making AM GREAT Again!


« Reply #5 on: April 14, 2023, 08:51:21 PM »

RG58.


--Shane
WP2ASS / ex KD6VXI
Logged
wa2tak
Member

Offline Offline

Posts: 110


« Reply #6 on: April 15, 2023, 09:31:52 AM »

THE important factor for choosing wire is the CURRENT CARRYING CAPABILITY.
Here's a chart on this:

https://precmfgco.com/wire-gauge-sizes-guide/
Logged
W0PWE
Member

Offline Offline

Posts: 10


« Reply #7 on: April 15, 2023, 09:54:13 AM »

Thanks for the suggestions.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.064 seconds with 18 queries.