The AM Forum
April 23, 2024, 05:15:46 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: FT102 AM/FM Board overshoot fix.  (Read 658 times)
0 Members and 1 Guest are viewing this topic.
w1cjf
Member

Offline Offline

Posts: 5


WWW
« on: March 21, 2023, 05:58:44 PM »

My FT102 has the overshoot issue and after reading the article I could see how bad mine did it...  I was looking at http://www.amwindow.org/tech/htm/ft102overshoot/ft102overshoot1.htm but man i am scared to do it since i know these am / fm boards are not easy to find and if you do not cheap...  Is there anyone in massachusetts or surrounding states that could do the mod to the am / fm board? I would hate to kill the board due to a mistake of mine.
Logged

Yeasu FT-102 AM/FM board // Johnson Ranger 2 // Flex 3000 // Amp Supply LK-550 (3) Tube Z box.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.076 seconds with 19 queries.