Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Seeking Qro 2500dx info




 
The AM Forum
October 27, 2021, 05:56:26 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Seeking Qro 2500dx info  (Read 401 times)
0 Members and 1 Guest are viewing this topic.
kc8gql
Member

Offline Offline

Posts: 2


« on: September 20, 2021, 06:20:24 PM »

I am looking for some one that can tell me value of the 1/4 watt resistor that goes from pin 2 to pin 7 on the meter switch. Thanks for your time .
  Rick KC8GQL
Logged
WB4AM
Member

Offline Offline

Posts: 132


« Reply #1 on: September 20, 2021, 07:57:08 PM »

Hello Rick,

Do you have the manual?

I have a 2500DX  and I am looking at the manual.   I am not seeing any 1/4 watt resistors in the circuit.
I am not  saying there isn't any,  I just cannot find it!  

I will keep looking, I must be over looking that section.

Ken


* 20210920_193827.jpg (1804.2 KB, 4032x1816 - viewed 49 times.)

* 20210920_194959.jpg (1459.5 KB, 4032x1816 - viewed 60 times.)

* 20210920_200548.jpg (1346.39 KB, 4032x1816 - viewed 48 times.)
Logged
KD6VXI
Contributing
Member
*
Offline Offline

Posts: 2418


Making AM GREAT Again!


« Reply #2 on: September 20, 2021, 08:51:55 PM »

W8JI now owns Command Tech after purchasing it from An Wireless.  You may try him as a last resort.

Be aware that Comand had quite a few changes, rarely documented, especially in the earlier days of the amp.  In the Palstar days this was mostly stopped, but it still happened as things where sorted out.

Some fitment on the earlier amps was done literally on the assembly line and QC table to take odd things, etc.

--Shane
KD6VXI
Logged
kc8gql
Member

Offline Offline

Posts: 2


« Reply #3 on: September 21, 2021, 08:48:21 AM »

It is not on my schematic either, but it is there. thanks for the info. thanks
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.096 seconds with 19 queries.