Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
for modulators - University Sound div. LTV Ling Altec, vintage 70's USA made




 
The AM Forum
October 16, 2021, 10:59:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: for modulators - University Sound div. LTV Ling Altec, vintage 70's USA made  (Read 1113 times)
0 Members and 1 Guest are viewing this topic.
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 7898



WWW
« on: April 14, 2021, 02:52:58 PM »

I happened to find these University Sound amps while looking for an LWT (Line Wattage Tester). I didn't realize until now that university Sound was a division of LTV Ling Altec.

Just mentioning them because they are USA-made and reasonable priced. These would be good for cathode/grid modulation of tube RF amps. My friend used cathode modulation on a 250TH with a similar sized Altec amp.

https://www.ebay.com/sch/i.html?_nkw=university+sound+amplifier

The 70's vintage USA made ones have the stylish 70s cabinets with the 'chevron' sides and usually blue. They are mostly 35 to 100 Watt sizes and have 70V and 25V outputs in addition to a speaker (usually the 4 and 8 Ohm) output.

There are later units made in the USA also. If so it will say on the back.
If it doesn't say made in USA, then it's not.


Logged

Radio Candelstein - Flagship Station of the NRK Radio Network.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.03 seconds with 18 queries.