The AM Forum
March 29, 2024, 12:40:46 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Adding 160 meters to the National NCL-2000  (Read 2107 times)
0 Members and 1 Guest are viewing this topic.
W3BH
Jim
Member

Offline Offline

Posts: 47


« on: December 15, 2020, 11:33:15 PM »

Gentlemen,

Has anybody out there managed to modify the NCL-2000 to cover 160 meters. Is it feasible. Advice and comments would be most welcome.

Many thanks,

Jim
W3BH

Brookline, NH 03033
w3bh.com
kjsorenson@gmail.com


Logged
KD6VXI
Contributing
Member
*
Offline Offline

Posts: 2648


Making AM GREAT Again!


« Reply #1 on: December 17, 2020, 09:58:30 PM »

Seems like an abortion to a good amp.  You'll need a new bandswitch as well as associated circuitry

I bought a viewatar 2500 that is a 160 to 10 amp for 600 bucks.  A new ceramic bandswitch h is almost a third of that.

--Shane
KD6VXI
Logged
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 8308



WWW
« Reply #2 on: December 18, 2020, 12:09:33 AM »

I'd never booger up my NCL2000 in that way. Too good of an amp to do such experiments in. Anyway, there isn't much room inside, so where would the large coil go, or even a toroid? Tuning caps big enough? and I mean the loading cap too. I think it's a bad idea.
Logged

Radio Candelstein - Flagship Station of the NRK Radio Network.
W3BH
Jim
Member

Offline Offline

Posts: 47


« Reply #3 on: December 18, 2020, 11:04:13 AM »

Thanks Opcom and KD6VXI,

I can't argue with you. There is insufficient space inside the 2000 for any modifications and I hate soldering rotary switches. I have a number of new in the box vintage Mallory rotary switches from a ham fest and one of them would do the job if I could actually trust the contacts to hold up. I was just asking in case someone out there has performed a miracle. It does not appear so and performing an unnecessary surgery on any National product is probably just wrong. I have an HRO-60, NC-303, NC-98 (my first receiver) and have owned many other National products over the years. The NCL-2000 is a very handsome and beautifully designed linear and its going to stay that way here. My bad for even thinking of such mods.

Plan B is to use a pair of 813s for a modest single band amp for 160 and I have all the parts necessary to do so. I won't have to solder a bandswitch either.

Thanks,
Jim
W3BH





Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 19 queries.