The AM Forum
April 20, 2024, 09:28:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Gates BC1g plate supply choke  (Read 1537 times)
0 Members and 1 Guest are viewing this topic.
k7mdo
Contributing
Member
*
Offline Offline

Posts: 420
« on: November 21, 2020, 06:39:54 PM »
Does anyone that has done a Gates bc1g conversion to 75 meter phone think the JW Miller 4534 f2f choke will handle the plate current?  It is rated 1.0 mH at 1000 milliamps.

It seems to me that this choke might work and not be too underrated?

Thank, Tom

* chokes.JPG (3783 KB, 666x375 - viewed 436 times.)
Logged
KB5MD
Contributing
Member
*
Offline Offline

Posts: 614
« Reply #1 on: November 28, 2020, 11:11:32 AM »
Why not use the original plate choke?  It will work fine on 75.
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Gates BC1g plate supply choke
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.