Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
behringer 9024 help




 
The AM Forum
November 25, 2020, 03:19:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: behringer 9024 help  (Read 293 times)
0 Members and 1 Guest are viewing this topic.
KC2FXE
Member

Offline Offline

Posts: 72



« on: November 14, 2020, 05:44:13 PM »

hello all
 I'm in need of some help with my 9024 , it stop working the leds just blink when you power it up.

 thanks for any help.

John kc2fxe Huh
Logged

John L.Ahrens Sr.
K1JJ
Contributing
Member
*
Offline Offline

Posts: 8414


"Let's go hiking in the woods, Tommy!" - Yaz


« Reply #1 on: November 14, 2020, 07:23:26 PM »

Hi John,

I have one here too.

Dave the ApeMan told me when this happens, you need to go in and replace the electrolytic capacitors.  I'm not sure which ones he meant, but contact him about it for more details.


T
Logged

Use an "AM Courtesy Filter" to limit transmit audio bandwidth  +-4.5 KHz, +-6.0 KHz or +-8.0 KHz when needed. 

Nothing like a new homebrew rig. Come into the shack, flip on the switches and everything works perfectly.

And, nothing like an old dog.
KA3EKH
Member

Offline Offline

Posts: 561



WWW
« Reply #2 on: November 15, 2020, 08:18:31 PM »

Itís a Bheringer, from what I have seen of most of there equipment itís not designed to be repaired, when it stops working you toss it and buy another! Looking at difficulty of getting the board out and access to both sides for replacement itís a big job, got to remove a ton of knobs and nuts and screws and at the end of the day itís still a Bheringer. Have trashed a lot of there stuff because one its cheap, two once things like the pots and connectors start to go finding replacements can be an issue and three replacements from Behringer are often so cheap why bother?
Logged
M0VRF
Member

Offline Offline

Posts: 106


« Reply #3 on: November 17, 2020, 03:02:49 AM »

A common problem on electronic equipment, even good (expensive!) stuff. I had a similar problem with a TC Electronics unit.

Easy to spot and usually in the SMPSU.

Just either replace all the electrolytics or find the ones with bulging tops or leaking bottoms!

No need to stick it I the trash, easy repair.
Logged
W2PFY
Contributing
Member
*
Offline Offline

Posts: 13214



« Reply #4 on: November 20, 2020, 12:35:26 PM »

See below. I wuz having a problem with the post quoting Johns stuff and including mine?
Logged

The secrecy of my job prevents me from knowing what I am doing.
W2PFY
Contributing
Member
*
Offline Offline

Posts: 13214



« Reply #5 on: November 20, 2020, 12:36:51 PM »

Quote
hello all
 I'm in need of some help with my 9024 , it stop working the leds just blink when you power it up.
Thanks for any help.
John kc2fxe [/b]

Check your power transformer to see if it's making power. If it is not, the transformer may be open.
It has two 120 volt windings. The transformer's are wound too tight and the wires break internally.

If this is the case, just hook up to the other 120 winding and your good to go. This may have nothing to do with your case John, but others should be informed about this fix.
Logged

The secrecy of my job prevents me from knowing what I am doing.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.034 seconds with 18 queries.